Meade 2080/LX6 Telescope

Questions about hardware and software not obtained from Shoestring Astronomy, but related to our products
Post Reply
pribo
Posts: 1
Joined: Tue Oct 03, 2006 1:35 pm

Meade 2080/LX6 Telescope

Post by pribo » Tue Oct 03, 2006 4:07 pm

I own a Meade 2080/LX6 telescope. I would like to buy a GPUSB, however, it has a 7 pin DIN connector instead of a RJ12. Does anyone know where I can get a cable to convert or the pinouts for the Meade 2080 so that I may make a cable. I also need to find a supplier for the 7 pin 180 degree DIN connector. All I could find on the internet is 270 degree.

Thank You,

Dave

dpanderson
Site Admin
Posts: 1025
Joined: Fri Apr 28, 2006 1:34 pm
Location: central Iowa
Contact:

Post by dpanderson » Thu Oct 05, 2006 2:02 pm

Dave,

If you have any links that describe the pinout of the connector, please let me know. If I can see the pinout and find the connector you need, then I might be able to build one for you.
Doug Anderson
Shoestring Astronomy
http://www.ShoestringAstronomy.com

Post Reply