FCUSB + Iogear GUWIP204 on e EQ-3
Posted: Thu Jan 30, 2014 8:14 am
Hi!
There has already been a small jeme'm setup with a head neq-3 pro synscan with goto and Telescope Orion ED-80 for visual and planetary photography.
Long, I tried making the head with this guide for astro-photo, but without success.
I just bought FCUSB and it works well if you plug directly into a USB port on the computer.
By cons, in my setup, I use a IOGear Wireless USB GUWIP204
I connect to my network with a cable that will allow the telescope controlled remotely with software like MaimDL.
The connection between the FCUSB and GUWIP204 not done!
I connection and a message that says the software found FCUSB,but connexte die!
There is something I can do?
I would put my setup outside and me in my house warm for the controlled..;0)
Thank in advance!
JBD
There has already been a small jeme'm setup with a head neq-3 pro synscan with goto and Telescope Orion ED-80 for visual and planetary photography.
Long, I tried making the head with this guide for astro-photo, but without success.
I just bought FCUSB and it works well if you plug directly into a USB port on the computer.
By cons, in my setup, I use a IOGear Wireless USB GUWIP204
I connect to my network with a cable that will allow the telescope controlled remotely with software like MaimDL.
The connection between the FCUSB and GUWIP204 not done!
I connection and a message that says the software found FCUSB,but connexte die!
There is something I can do?
I would put my setup outside and me in my house warm for the controlled..;0)
Thank in advance!
JBD