lxusb/webcam modification

[Dan]

fixing to modify a phillips 900 webcam to work long exposure w/lxusb. not quite sure about connecting single ended rj-12 or 11? cable from shoestring. i was looking @ sc-1 mod on the steve chamber site, but it doesn't deem to address the shoestring cable. anyone who might have info i would appreciate it.

[dpanderson]

Dan,

On page 4 of the LXUSB User Manual (http://www.store.shoestringastronomy.co ... _LXUSB.pdf) is a diagram of how the RJ-12 connector should be pinned out in order to work with the LXUSB. The names of the signals in that document should correspond with signal names shown on Steve Chambers' website.

[Dan]

ya i looked on that site and it seems to show how to wire for serial connector but not to the lxusb cable. i know that is an old configuration. i will have to look at it some more. one of the guys over @ maxim was writing a new driver for me to run two web cameras together. one for guiding & one for imaging. them guys are pretty good. it works well. i'll let you know what happens with the lxusb after a little more study & thought on steves web site.
thanx