Nebulosity and Canon 400D

Questions about hardware and software obtained directly from Shoestring Astronomy
Post Reply
Roberto Caurim
Posts: 2
Joined: Sat Aug 13, 2011 7:16 am
Anti-spam question: Astronomy

Nebulosity and Canon 400D

Post by Roberto Caurim » Thu Sep 01, 2011 8:02 pm

Hi.
I've used my DSUSB and works Ok whith Canon 400D. Leds works properly, green on/off, red on/off. Shutter works too.
But when I try to connect whith Nebulosity, just doesn't work. Device not found...
May you help me ?
Tanks,

Roberto

dpanderson
Site Admin
Posts: 1047
Joined: Fri Apr 28, 2006 1:34 pm
Location: central Iowa
Contact:

Re: Nebulosity and Canon 400D

Post by dpanderson » Thu Sep 01, 2011 9:21 pm

Roberto,

Since the DSUSB does work with DSUSBCheck software and not Nebulosity, it seems like the issue is with Nebulosity. The best place for tech support would be:
http://tech.groups.yahoo.com/group/star ... -software/
There may already be posts from other users that have had a similar problem there. If not, try a post to see if there is someone that has a solution.
Doug Anderson
Shoestring Astronomy
http://www.ShoestringAstronomy.com

Roberto Caurim
Posts: 2
Joined: Sat Aug 13, 2011 7:16 am
Anti-spam question: Astronomy

Re: Nebulosity and Canon 400D

Post by Roberto Caurim » Fri Sep 02, 2011 1:21 pm

Hi Doug,

I found out the problem. I did not connect both cables :D (DSUSB and USB), just DSUSB.
Now, DSUSB works fine and I can connect with Nebulosity and BackyardEOS.
Tanks a lot
Roberto

Post Reply