Is the CCD port of the Losmandy 492 system directly compatable with the output of the GPUSB? Is it just a direct 6 pin plug to plug connection? I thought I'd ask first this time before I start blowing things up!
Thanx!
GPUSB & Losmandy 492
-
- Site Admin
- Posts: 1047
- Joined: Fri Apr 28, 2006 1:34 pm
- Location: central Iowa
- Contact:
Re: GPUSB & Losmandy 492
To the best of my knowledge, it is. However, I cannot find a completely accurate description of their guide port. The pinout looks compatible, but I cannot say for sure if they are "active high" or "active low" inputs. If you could check with Losmandy, that would be best.