Page 1 of 1

Vixen DD-1 AutoGuider Relay Cable

Posted: Tue Jul 26, 2011 8:31 am
by mho
Hello Everyone,

I have developed a relay cable for the Vixen DD-1 hand controller that will allow ST-4 compatible cameras such as the Orion StarShoot AutoGuider to be connected to a modified Vixen DD-1. To make the circuit boards I had to order a minimum number so I had 8 left over after the one I built. I created a web page describing the circuit and DD-1 modification procedure at http://agrc.miltonhill.us and can provide the circuit board or complete cable to people who may want one. I have not figured out what to charge so give me an idea on what you think it would be worth. Unlike other relay solutions I have looked the one I have requires no external power, it is powered from the Vixen DD-1.

Sincerely,
William E. Rison