SVP with Envisage (and guiding?)

Questions about hardware and software not obtained from Shoestring Astronomy, but related to our products
Post Reply
msibleyj
Posts: 7
Joined: Thu Sep 06, 2007 11:19 pm

SVP with Envisage (and guiding?)

Post by msibleyj » Sat Sep 22, 2007 10:57 am

I'm having problems getting my software to work with my hardware! I have an SVP dual axis using GPUSB with 2 refractors (guider with DSI Pro and imager with DSI Pro II). It works great with PHP Guiding. Was able to image with K3CCD Tools, but couldn't get Envisage to work with PHP Guiding. I then did a little homework on using Envisage for imaging and tracking and installed the emulator (HW_VSP3-single), but couldn't get it to work ... kept getting an error when trying to set up a com port.

1. Are there some instructions somewhere on how to set up the emulator with Envisage? Like an "Emulator for Dummies?"

2. Is it possible to guide with PHP Guiding (or other guiding software) and Image with Envisage?

Thanks for your help.

Mark J

msibleyj
Posts: 7
Joined: Thu Sep 06, 2007 11:19 pm

Post by msibleyj » Sat Sep 22, 2007 12:54 pm

I think I may have found the answer...

http://tech.groups.yahoo.com/group/auto ... ssage/1607

Mark J

Post Reply