USB2EQ6 Connection Issues

Questions about hardware and software obtained directly from Shoestring Astronomy
Post Reply
davisonc
Posts: 1
Joined: Tue Dec 04, 2018 8:33 am
Anti-spam question: Astronomy

USB2EQ6 Connection Issues

Post by davisonc » Tue Dec 04, 2018 8:53 am

Hi Team,

I recently received the USB2EQ6 cable but I am constantly receiving a timeout connection error using EQMOD and also the EQDIR responds with cannot connect to mount. The computer finds the connection and if I connect to mount without the USB2EQ6 cable i.e. through pc direct mode and handset it works.

I am wondering if there is anything I am doing wrong e.g. which drivers should I use for the FTDI chip most recent or older versions? I am assuming that I have been supplied correct cable even though there is no identifier on it to say it is EQ6 i.e. could it be similar but cabled differently?

Thank you in advance for your thoughts on the above.

Regards,

Craig

dpanderson
Site Admin
Posts: 1047
Joined: Fri Apr 28, 2006 1:34 pm
Location: central Iowa
Contact:

Re: USB2EQ6 Connection Issues

Post by dpanderson » Thu Dec 13, 2018 1:31 pm

I worked with Craig on this issue and we figured out there was a wiring issue on the USB2EQ6 he received that escaped through our normal test process. We will be revising that process to prevent this from happening in the future.
Doug Anderson
Shoestring Astronomy
http://www.ShoestringAstronomy.com

Post Reply