Trying to use my DSUSB with Eclipse Orchestrator, Windows 10 says serial port not found. Is anyone using this
successfuly with Windows 10? thanks
Windows 10 and DSUSB driver
-
richard85392
- Posts: 1
- Joined: Sat Jul 15, 2017 7:00 pm
- Anti-spam question: Astronomy
-
dpanderson
- Site Admin
- Posts: 1060
- Joined: Fri Apr 28, 2006 1:34 pm
- Location: central Iowa
- Contact:
Re: Windows 10 and DSUSB driver
I have not used the DSUSB with Eclipse Orchestrator, but the DSUSB is not a serial port device. From the Shutter Cable Configuration screen shown at:
http://www.moonglowtechnologies.com/pro ... ro.shtml#4
I am guessing you need to select the DSUSB instead of Serial Port.
We have had many people successfully use the DSUSB with EO, I've got to believe some of them are on Win 10.
http://www.moonglowtechnologies.com/pro ... ro.shtml#4
I am guessing you need to select the DSUSB instead of Serial Port.
We have had many people successfully use the DSUSB with EO, I've got to believe some of them are on Win 10.
Re: Windows 10 and DSUSB driver
I am using DSUSB in Eclipse Orchestrator 3.7 with Windows 10 without any problems.
As Doug repied, In the Eclipse Orchestrator hardware configuration menu for the Use Serial Cable configuration, you have to select DSUSB.
I also found that I had to set the triggering pulse length down to 6 ms to avoid double triggering with my EOS 7D. EO documentation suggested 50.
Good luck with EO.
Clear Skies!
Steve
As Doug repied, In the Eclipse Orchestrator hardware configuration menu for the Use Serial Cable configuration, you have to select DSUSB.
I also found that I had to set the triggering pulse length down to 6 ms to avoid double triggering with my EOS 7D. EO documentation suggested 50.
Good luck with EO.
Clear Skies!
Steve