Hello, I recently purchased a BT2EQ6 but have misplaced any instructions that came with the hardware. I'm having problems connecting via bluetooth to the BT2EQ6 using a windows 8 pro laptop. Are their any instructions for this device? Do I need to load any drivers? Is there a passcode? Do I need a specific data rate?
I've tried EQDIRCheck without much success. The programs hangs when I supply it a port number and never connects to the BT2EQ6.
Any help would be much appreciated.
Thank you,
Alex
BT2EQ6 Setup Problems
-
dpanderson
- Site Admin
- Posts: 1048
- Joined: Fri Apr 28, 2006 1:34 pm
- Location: central Iowa
- Contact:
Re: BT2EQ6 Setup Problems
Alex,
Apologies for the slow reply, I just returned from business travel. I see you have successfully solved your problem through the EQMOD Yahoo group. If there is anything else I can do to help, please let me know.
Apologies for the slow reply, I just returned from business travel. I see you have successfully solved your problem through the EQMOD Yahoo group. If there is anything else I can do to help, please let me know.
Re: BT2EQ6 Setup Problems
From the diode check results, it sounds like the GPUSB is working fine. The 2.5V may be because of resistance in the cable and/or a marginal connection.