Page 1 of 1

Bahtinov Grabber

Posted: Sun Sep 28, 2014 6:52 pm
by dts350z
I was trying to use this:

http://www.njnoordhoek.com/?p=660

with focus usb, but it gives an error when you select the Focus USB Ascom driver in the Ascom dialog.

Image

I have tried both the 32 bit and 64bit version of Bahtinov Grabber but no luck, same error.

Unfortunately Bahtinov Grabber is no longer being developed as the author has passed, but I thought I check here to see if there was some solution.

I'm using the current ASCOM version.

Re: Bahtinov Grabber

Posted: Mon Sep 29, 2014 7:34 pm
by dpanderson
I have not seen this error before. You might give this driver a try:
http://store.shoestringastronomy.com/do ... 0Setup.exe

If that doesn't work, there is usually good advice on the ASCOM Yahoo group:
https://groups.yahoo.com/group/ASCOM-Talk/

Re: Bahtinov Grabber

Posted: Mon Sep 29, 2014 8:35 pm
by dts350z
That driver works fine with BYEOS, but with Bathinov Grabber it now says "problem talking to focuser. Is it connected?