Iver,
I sent you a private message a couple of days ago. If you did not receive it, let me know and I will send again.
Search found 1046 matches
- Sun Jan 28, 2007 12:44 am
- Forum: Shoestring Hardware and Software
- Topic: FCUSB X 2
- Replies: 9
- Views: 16290
- Fri Jan 26, 2007 8:26 am
- Forum: Shoestring Hardware and Software
- Topic: Gpint Pt not working
- Replies: 2
- Views: 5691
- Thu Jan 18, 2007 8:46 am
- Forum: Shoestring Hardware and Software
- Topic: FCUSB X 2
- Replies: 9
- Views: 16290
Unfortunately, this is not possible from the same computer. This is a downfall of USB in general, it is very difficult to differentiate between two identical devices plugged into the same computer. We are working on ways to try and solve this problem, but have not come up with an elegant solution ye...
- Tue Jan 16, 2007 1:33 pm
- Forum: Third-Party Hardware and Software
- Topic: Guiding a LXD75 mount with METAGUIDE
- Replies: 4
- Views: 19517
I believe PHD Guiding will stack images also. From the PHD Guiding webpage http://www.stark-labs.com/phdguiding.html, in the features list it says "Stacking shorter subframes on the fly to extend effective exposure duration on short-exposure cameras"
- Tue Jan 16, 2007 1:30 pm
- Forum: Shoestring Hardware and Software
- Topic: GPUSB and vixen sphinx
- Replies: 1
- Views: 4641
- Sun Jan 14, 2007 12:12 pm
- Forum: Third-Party Hardware and Software
- Topic: Guiding a LXD75 mount with METAGUIDE
- Replies: 4
- Views: 19517
Rosendo, I don't think this will be possible. The LXD75 does not have an autoguide port, so you can't connect up that way. Furthermore, Metaguide does not support ASCOM telescope drivers. If it did, then you could use your existing setup via the serial port. You might think about trying PHD Guiding ...
- Thu Jan 11, 2007 10:16 pm
- Forum: New Product Ideas?
- Topic: USB controller for TG-SP II or any other mount?
- Replies: 10
- Views: 25855
oldfield, Page 5 of this document is exactly what I need. I have a lot of other projects going on right now, so it may be months before I could even think of getting to this, but I will consider it. If nothing else, I think the handcontroller can be modified to add an ST-4 compatible guide port. How...
- Thu Jan 11, 2007 12:36 pm
- Forum: New Product Ideas?
- Topic: USB controller for TG-SP II or any other mount?
- Replies: 10
- Views: 25855
- Tue Jan 09, 2007 6:56 pm
- Forum: Shoestring Hardware and Software
- Topic: JMI NGF-S
- Replies: 3
- Views: 10362
- Sun Jan 07, 2007 12:29 am
- Forum: Third-Party Hardware and Software
- Topic: FCUSB/JMI PCFC with CCDSoft
- Replies: 13
- Views: 29516
- Sat Jan 06, 2007 1:43 pm
- Forum: Third-Party Hardware and Software
- Topic: FCUSB/JMI PCFC with CCDSoft
- Replies: 13
- Views: 29516
- Fri Jan 05, 2007 2:00 pm
- Forum: Third-Party Hardware and Software
- Topic: FCUSB/JMI PCFC with CCDSoft
- Replies: 13
- Views: 29516
Bill, I'll modify the ASCOM driver so that it reports "position" and email it to you to give a try. I probably won't get to it until Sunday at the earliest. This will not indicate the actual position, but an approximate position based upon how much time in milliseconds the motor has been asked to mo...
- Thu Jan 04, 2007 8:49 am
- Forum: Shoestring Hardware and Software
- Topic: Guiding an Atlas eq-g with PHD
- Replies: 2
- Views: 5803
Marco, This should work just fine. However, one thing to keep in mind with USB, if you run out of ports you can always add a hub. On my own permanent setup, I keep the hub strapped to the pier and all the USB gadgets plugged into it. Then, when I walk out for an imaging session with the laptop, all ...
- Thu Jan 04, 2007 8:45 am
- Forum: Third-Party Hardware and Software
- Topic: FCUSB Maxim DL
- Replies: 8
- Views: 23020
- Thu Jan 04, 2007 8:45 am
- Forum: Third-Party Hardware and Software
- Topic: FCUSB/JMI PCFC with CCDSoft
- Replies: 13
- Views: 29516
Bill, After some dialogue with Software Bisque tech support and the fellow that wrote the FocusAPI that allows ASCOM drivers to work with CCDSoft, I don't think there is a quick and easy solution to this problem. CCDSoft expects a focuser to be able to report its position. Because the FCUSB has no k...